Welcome to the Home of
Daihatsu Oceania & Compact Motorsport
Daihatsu Parts Distributor and Specialist in Automotive Engineering Design
HOW TO IDENTIFY YOUR DAIHATSU DM ENGINE
Ordering parts is much easier when you know exactly which engine you have. Here's where to look.
ENGINE-ID TIP: CHECK YOUR INJECTION PUMP CODE
Diesel injection pumps carry a small nameplate with a three-character ID code. Match it before you order a pump:
9U1 = DM950D, pump 22100-87802
9U4 = DM950DTH, pump 22100-87811
9U5 = DM950DT, pump 22100-87818
The full code list is in section 4 below.
1. THE MODEL BADGE
The model name is on a badge on the rocker (valve) cover, for example DM950D, DM950DT, DM950DTH or DM950GH.
D = naturally aspirated diesel
DT = turbo diesel
DTH = turbo diesel, high output
G / GH = petrol / high-output petrol
P / PH = LPG / high-output LPG
2. THE ENGINE NUMBER
The engine model and serial number are on a label on the rocker cover. The serial number is also stamped into the right-hand side of the cylinder block, behind the intake manifold. That's handy if the label has gone.
3. BRIGGS & STRATTON BADGED ENGINES
Many DM engines were sold as Briggs & Stratton engines and carry a B&S model / type / code label (for example 582447-0105-E2) plus a date-code label. The first six characters tell you the Daihatsu model:
B&S model | Daihatsu engine
432447 | DM700D
522447 | DM850D
582447 | DM950D
588447 | DM950DT
58A447 | DM950DTH
430400 | DM700G
580400 | DM950G / GH
The type number after the first dash matters too. Equipment makers ordered engines with different speed settings and fittings, so please include it when you contact us.
4. THE INJECTION PUMP CODE (DIESELS)
The fuel injection pump has a small nameplate on its side showing the pump part number and a three-character ID code:
First digit = engine size: 7 = 700 cc, 8 = 850 cc, 9 = 950 cc
Letter = market: U = USA, J = Japan, X = other markets
Last digit = version
ID code | Pump part number | Engine
7U1 | 22100-87801 | DM700D
7U2 | 22100-87813 | DM700D
8U1 | 22100-87807 | DM850D
8U2 | 22100-87809 | DM850D
8U3 | 22100-87810 | DM850D
8U4 | 22100-87815 | DM850D
8U5 | 22100-87817 | DM850D
9U1 | 22100-87802 | DM950D
9U2 | 22100-87806 | DM950D (some equipment versions)
9U4 | 22100-87811 | DM950DTH
9U5 | 22100-87818 | DM950DT
Pumps are set at the factory for each engine type, so idle and maximum speeds can differ between two pumps with the same part number. The standard setting is about 1200 rpm idle and 3850 rpm maximum no-load, but some equipment uses other settings. Tell us your B&S type number so we can match it.
5. DIESEL, PETROL OR TURBO: QUICK CHECKS
Turbo (DT / DTH): a turbocharger is fitted, and the engine is taller (about 538 mm, against about 501 mm for the DM950D).
Diesel: injection pump and glow plugs.
Petrol / LPG: spark plugs, with one ignition coil per cylinder.
STILL NOT SURE?
Send your engine number, the B&S model/type number (if fitted) and a photo of the engine to sales@compactmotorsport.com. We'll confirm the right parts before you order.
Shop DM950 parts: https://www.compactmotorsport.com/industrial-engines
Email: sales@compactmotorsport.com. Send your engine number.
Daihatsu and Briggs & Stratton are trademarks of their respective owners; Compact Motorsport is an independent parts supplier.

